27
Oct
Author: DJEquip // Category:
Pro Audio Equipment
I’ve been using this for 2 years at my gigs to record my performances. Works great…never let me down.
Want to install new subs and amp,dont know what to look at…?
looking at a few subs and some amps online and heres my problem, idk what to get and idk if the amps go good with the subs.Choice 1:Kenwood eXcelon (premium series) 1000 watt 4 channel amp# 4-channel car amplifier# 88 watts RMS x 4 at 4 ohms (124 watts RMS x 4 at 2 ohms)# 270 watts x 2 in bridged mode (4-ohm stable in bridged mode)# variable high- and low-pass filters (50-200 Hz, 24 dB/octave low-pass, 12 dB/octave high-pass)# variable bass control (-15 to +15 dB selectable for 60/80/100/200 Hz and selectable Q factor)# subsonic filter (channels 3,4 — 15 Hz, 24 dB/octave)# variable treble control (-15 to +15 dB selectable for 10/12.5/15/17.5 kHz)# A.M.S. (Amplifier Management System)# AMP Information Display (voltage, current, temperature, cooling fan speed)# 2-speed cooling fan# gold-plated preamp inputs and outputs# CEA-2006 compliant# fuse rating: 30A x 2# 4-gauge power and ground leads recommended Pro audio Stage — wiring and hardware not included with amplifier# 17-5/8″W x 2-3/8″H x 10-1/2″DPowering 2 12″# 12″ Single 4 Ohm eXcelon Series Shallow Subwoofer# Power Handling: * Peak: 1400 watts * RMS: 350 watts# Impedance: Single 4 ohm# Glass carbon fiber cone# Butyl rubber surround# Super linear spider# Aluminum diecast basket# Heat transfer system# Frequency response: 30-700 Hz# Sensitivity: 91 dBOR Choice 2:JL Audio A Series A6450 6 Channel Amp# 6-channel car amplifier# at 14.4 volts: * 70 watts RMS x 6 at 4 ohms (110 watts RMS x 6 at 2 ohms) * 220 watts RMS x 3 bridged at 4 ohms# at 12.5 volts: * 45 watts RMS x 6 at 4 ohms (75 watts RMS x 6 at 2 ohms) * 150 watts RMS x 3 bridged at 4 ohms# differential-balanced inputs# Advanced Rollback Protection System# variable high- and low-pass filter (50-200 Hz, 12 dB/octave)# switchable bass boost on ch. 5 and 6 (0, 6 dB at 48 Hz)# optional wired remote bass boost# Absolute Symmetry™ Class-AB amplifier design# MOSFET power and output stages# preamp-level inputs# speaker-level input with optional converter# 4-gauge power and ground leads and a 60-amp fuse recommended — wiring and hardware not included with amplifier# no onboard fuses — when installing multiple amps in a system, an additional 60-amp in-line fuse between the distribution block and the amplifier is recommended# 18-1/8″W x 2-1/2″H x 9-1/4″DPowering MMats Pro Audio P2.5 10″ Subwoofers# Dual 4 Ohm Voice Coils# Fs (Hz) 24# Vas (Liters) 72.7# Qts .11# SPL (1W/1M) 88 dB# Power (Wrms) 400# Mounting Depth (inches) 5-5/8″# Hole Diameter(inches) 9-3/16″# Speaker Displacement (cuft.) .10AND POWERING 4 Sony Xplōd™ GT Series Speakers (that i already have installed) * Power Handling Capacity : 190 Watts * Rated Input : 40 watts * Frequency Response : 50-23,000 Hz * Impedance : 4 ohm * Sensitivity (db) : 87+/-2dB(1m,1W)I dont know what the best would be, can anyone help?
Powered by Yahoo! Answers
Tags: Audio Stage, Gigs, Keyword, Stage 1
